How Garrett Engines Were Made in Leiston
A Garrett engine did not arrive in the world as a single finished machine. It began as timber patterns, raw iron, steel plate, rivets and carefully measured drawings, then passed through the hands of many skilled people at the Leiston works. Understanding how Garrett engines were made also reveals something bigger: how a Suffolk factory shaped the working lives, homes and streets of the town around it.
A factory built around making big machines
Richard Garrett and Sons grew from an agricultural engineering business into one of Britain’s best-known makers of steam machinery. The firm produced equipment for farms, estates, roads, building sites and industry, including portable engines, traction engines, steam rollers, steam wagons and a wide range of agricultural implements.
These were not small objects that could be made at one bench by one craftsperson. A traction engine, for example, brought together a heavy boiler, a cast-iron cylinder, gears, wheels, steering parts, pipework and fittings, all of which had to work safely under steam. The challenge was to make each part accurately, then bring it together in an orderly way.
The Long Shop, built at the Garrett works in 1852, helped make this possible. Its long, open interior allowed work to be organised in stages. Components could be brought in at one end, assembled along the building and leave as completed machines. It is often described as an early example of a production line, although it was very different from the conveyor-belt factories people may picture today. Much of the work still depended on skilled judgement, hand tools and experience.
How Garrett engines were made, stage by stage
From drawing board to wooden pattern
Before metal could be poured or cut, an engine had to be planned. Engineers produced drawings that set out the size and relationship of the parts. Garrett engines were made in several types and sizes, often with features selected for a customer’s intended work. An engine for hauling on the road had different demands from one intended to drive a threshing machine on a farm.
For cast parts, pattern makers created precise wooden forms. These patterns were used to make moulds in sand. They were not simply rough shapes: the pattern had to allow for the way hot metal cooled and shrank. A mistake at this stage could affect every casting that followed, so pattern making required care, mathematical understanding and practical knowledge of materials.
Casting the iron parts
The foundry was one of the hottest and most dramatic parts of the works. Iron was melted in furnaces and poured into sand moulds to create components such as cylinder blocks, gear wheels, brackets and other shaped parts. Once cooled, a casting was removed from its mould and cleaned up.
Cast iron was useful because it could be formed into complex shapes and provided the strength needed for heavy engineering. But it was not a magic solution. A casting could contain flaws, and a piece that looked finished when it left the mould still needed considerable work before it could become part of an engine.
This is where the sound and rhythm of the works mattered. Foundry work, hammering, lifting and machining created an environment that was physically demanding and potentially dangerous. The finished engines are impressive, but they also represent the labour of people working with heat, weight, noise and dirt every day.
Machining for a close fit
Castings and forged pieces then moved to the machine shops. Here, workers used lathes, planing machines, drilling machines and other tools to cut metal to the required dimensions. The cylinder bore had to be smooth and true; shafts had to turn correctly; gears had to mesh; bolt holes had to line up.
Steam engineering relied on close fits, but it was not identical to modern computer-controlled manufacture. Measurements, gauges and machine tools brought consistency, while skilled fitters made the final adjustments. Parts were scraped, filed and tested against one another until they moved as they should.
This combination of machinery and craftsmanship was central to Garrett production. The works could make large numbers of components and organise them efficiently, yet the people doing the work remained essential. An experienced fitter could recognise a problem through the feel of a moving part or the sound of a machine in operation.
Building the boiler
The boiler was the heart of a steam engine and demanded particular care. Boiler makers shaped steel or iron plates into the barrel and firebox, then joined them with rows of rivets. Holes had to be marked and drilled accurately, while plates were heated, bent and fitted into position.
Riveting was hard, coordinated work. One worker held a rivet in place while another formed its head, often with a pneumatic or hand-held tool. The aim was a strong, tight joint capable of containing high-pressure steam. Tubes, stays, fittings, valves and the firebox were added as the boiler took shape.
A boiler could not simply be assumed safe because it looked sound. It needed careful inspection and testing. Steam power brought great possibilities for transport and farming, but it also carried serious risks if a boiler or valve failed. Safety depended on good materials, careful workmanship, regular maintenance and responsible operation long after the engine left Leiston.
Assembly in the Long Shop
Once major parts were ready, they came together in the Long Shop. Heavy lifting gear helped move boilers, frames and wheels into place. Assemblers fitted the engine, transmission, steering gear, bodywork and the many smaller components that made a working machine possible.
The order of assembly mattered. A large boiler or frame had to be positioned before some smaller parts could be attached. Work was planned so that materials and components moved through the building rather than being carried back and forth without purpose. This saved time, but it also required foremen, labourers, fitters, machinists and others to coordinate their work.
As an engine neared completion, it acquired the features visitors recognise today: its tall chimney, broad wheels, polished brass fittings and Garrett nameplates. These details were more than decoration. Gauges, lubricators and controls allowed the driver to monitor and manage a powerful working machine.
Testing, painting and dispatch
Before an engine could be sent to a customer, it had to prove itself. Boilers were tested, moving parts checked and engines run under steam. Any fault discovered at this point meant more adjustment. Testing was a final safeguard, but it was also part of the firm’s reputation. A machine sent out from Leiston had to earn its keep in difficult conditions, whether on a muddy farm track, a road gang’s working site or a distant estate.
Painting protected the metal from weather and wear, while lining and lettering gave the finished machine a distinctive appearance. Engines were then prepared for dispatch, travelling by road, rail or ship to customers across Britain and overseas.
The people behind the engines
It is tempting to tell this story through the machines alone. Yet a Garrett engine represents a community of people: draughtsmen, pattern makers, moulders, boiler makers, fitters, labourers, painters, clerks and apprentices. Their jobs required different skills, and their wages and working conditions affected family life across Leiston.
The works also created employment beyond the factory gates. Shops, housing, schools, social clubs and local services were all connected, directly or indirectly, to the fortunes of Garrett’s. Women’s work, wartime service and changing opportunities in the twentieth century are part of this history too. Industrial heritage is not only about what was made, but who made it, who relied on it and how their town changed with it.
Not every Garrett product followed exactly the same route through the works. Production methods changed over time, and a smaller implement did not need the same processes as a steam wagon. Even engines of the same type might be adapted for particular customers or markets. That variation is one reason surviving machinery can tell such rich individual stories.
Looking closely at what survives
When you stand beside a Garrett engine, look beyond its size and shine. Notice the riveted boiler seams, the cast lettering, the machined surfaces, the gear teeth and the controls within reach of its driver. Each detail points back to a different part of the factory and a different kind of skill.
At the Long Shop Museum, the building itself helps bring that process to life. It is a place where engineering can be understood not as a distant technical achievement, but as the shared work of generations of Leiston people. The next time you hear a steam engine working, listen for more than the machinery: you are hearing the result of design, labour, testing and local pride made tangible.